Dell S4048–ON Configuration Manual page 838

4/56 4/48
Dell#
The following example shows the parameters for the management unit in the stack.
Dell#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S4810 - 52-port GE/TE/FG (SE)
Current Type : S4810 - 52-port GE/TE/FG (SE)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 64
Up Time : 1 min, 14 sec
Dell Networking OS Version
Jumbo Capable : yes
POE Capable : no
Boot Flash : 1.2.0.2
Memory Size : 2147483648 bytes
Temperature : 44C
Voltage : ok
Serial Number : H1DL104400018
Part Number : Rev
Vendor Id :
Date Code :
Country Code :
Piece Part ID : N/A
PPID Revision : N/A
Service Tag : N/A
Expr Svc Code : N/A
Auto Reboot : disabled
Burned In MAC : 00:01:e8:8c:53:32
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus
---------------------------------------------
Unit Bay Status Type FanStatus
---------------------------------------------
1 0 absent
1 1 up AC
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------
1 0 up
1 1 up
Speed in RP
The following example shows three switches stacked together in a daisy chain topology.
stack-2#show system stack-ports
Topology: Daisy chain
Interface Connection Link
-------------------------------------------------------
3/36 1/36
3/37 1/37
3/38 1/38
3/39 1/39
3/44 2/36
3/45 2/37
3/46 2/38
3/47 2/39
1/36 3/36
838
Stacking
40 up up
: 4810-8-3-12-1447
absent
up
up 7200 up 7200
up 7200 up 7440
Speed Admin
(Gb/s) Status Status Group
10 up up
10 up up
10 up up
10 up up
10 up up
10 up up
10 up up
10 up up
10 up up
Link Trunk