Displaying A Dscp Color Policy Configuration; Enabling Qos Rate Adjustment - Dell S4048–ON Configuration Manual

S-series 10gbe switches
Hide thumbs Also See for S4048–ON:
Table of Contents

Advertisement

yellow 4,7
red 20,30
Dscp-color-map mapTWO
yellow 16,55
Display a specific DSCP color map.
Dell# show qos dscp-color-map mapTWO
Dscp-color-map mapTWO
yellow 16,55

Displaying a DSCP Color Policy Configuration

To display the DSCP color policy configuration for one or all interfaces, use the show qos dscp-color-policy {summary
[interface] | detail {interface}} command in EXEC mode.
summary: Displays summary information about a color policy on one or more interfaces.
detail: Displays detailed color policy information on an interface
interface : Enter the name of the interface that has the color policy configured.
Examples for Displaying a DSCP Color Policy
Display summary information about a color policy for one or more interfaces.
Dell# show qos dscp-color-policy summary
Interface
dscp-color-map
TE 1/10
mapONE
TE 1/11
mapTWO
Display summary information about a color policy for a specific interface.
Dell# show qos dscp-color-policy summary tengigabitethernet 1/10
Interface
dscp-color-map
TE 1/10
mapONE
Display detailed information about a color policy for a specific interface
Dell# show qos dscp-color-policy detail tengigabitethernet 1/10
Interface TenGigabitEthernet 1/10
Dscp-color-map mapONE
yellow 4,7
red 20,30

Enabling QoS Rate Adjustment

By default while rate limiting, policing, and shaping, Dell Networking OS does not include the Preamble, SFD, or the IFG fields. These
fields are overhead; only the fields from MAC destination address to the CRC are used for forwarding and are included in these rate
metering calculations.
The Ethernet packet format consists of:
Preamble: 7 bytes Preamble
Start frame delimiter (SFD): 1 byte
Destination MAC address: 6 bytes
Source MAC address: 6 bytes
Ethernet Type/Length: 2 bytes
Payload: (variable)
Cyclic redundancy check (CRC): 4 bytes
Inter-frame gap (IFG): (variable)
You can optionally include overhead fields in rate metering calculations by enabling QoS rate adjustment.
692
Quality of Service (QoS)

Advertisement

Table of Contents
loading

Table of Contents