Dell S4048–ON Configuration Manual page 602

– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
– For a port channel interface, enter the keywords port-channel then a number.
– For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
To enable both receiving and sending routing updates, use the no passive-interface interface command.
To indicate that hello packets are not transmitted on that interface, when you configure a passive interface, the show ipv6 ospf
interface command adds the words passive interface.
Redistributing Routes
You can add routes from other routing instances or protocols to the OSPFv3 process.
With the redistribute command, you can include RIP, static, or directly connected routes in the OSPF process. Route
redistribution is also supported between OSPF Routing process IDs.
To add redistributing routes, use the following command.
• Specify which routes are redistributed into the OSPF process.
CONF-IPV6-ROUTER-OSPF mode
redistribute {bgp | connected | static} [metric metric-value | metric-type type-value]
[route-map map-name] [tag tag-value]
Configure the following required and optional parameters:
– bgp | connected | static: enter one of the keywords to redistribute those routes.
– metric metric-value: The range is from 0 to 4294967295.
– metric-type metric-type: enter 1 for OSPFv3 external route type 1 OR 2 for OSPFv3 external route type 2.
– route-map map-name: enter a name of a configured route map.
– tag tag-value: The range is from 0 to 4294967295.
Configuring a Default Route
To generate a default external route into the OSPFv3 routing domain, configure the following parameters.
To specify the information for the default route, use the following command.
• Specify the information for the default route.
CONF-IPV6-ROUTER-OSPF mode
default-information originate [always [metric metric-value] [metric-type type-value]]
[route-map map-name]
Configure the following required and optional parameters:
– always: indicate that default route information is always advertised.
– metric metric-value: The range is from 0 to 4294967295.
– metric-type metric-type: enter 1 for OSPFv3 external route type 1 OR 2 for OSPFv3 external route type 2.
– route-map map-name: enter a name of a configured route map.
Enabling OSPFv3 Graceful Restart
Follow the procedure in this section to configure graceful restart for OSPFv3. By default, OSPFv3 graceful restart is disabled and
functions only in a helper role to help restarting neighbor routers in their graceful restarts when it receives a Grace LSA.
.
By default, OSPFv3 graceful restart is disabled and functions only in a helper role to help restarting neighbor routers in their graceful
restarts when it receives a Grace LSA.
To enable OSPFv3 graceful restart, enter the ipv6 router ospf process-id command to enter OSPFv3 configuration
mode. Then configure a grace period using the graceful-restart grace-period command. The grace period is the time
602
Open Shortest Path First (OSPFv2 and OSPFv3)