Dell S4048–ON Configuration Manual page 269

Table 22. show interface pfc summary
Fields
Interface
Admin mode is on; Admin is enabled
Remote is enabled; Priority list Remote Willing Status is enabled
Local is enabled
Operational status (local port)
PFC DCBx Oper status
State Machine Type
TLV Tx Status
PFC Link Delay
Application Priority TLV: FCOE TLV Tx Status
Application Priority TLV: ISCSI TLV Tx Status
Application Priority TLV: Local FCOE Priority Map
Application Priority TLV: Local ISCSI Priority Map
Application Priority TLV: Remote FCOE Priority Map
Application Priority TLV: Remote ISCSI Priority Map
PFC TLV Statistics: Input TLV pkts
Command Description
Description
Interface type with stack-unit and port number.
PFC Admin mode is on or off with a list of the configured PFC
priorities . When PFC admin mode is on, PFC advertisements are
enabled to be sent and received from peers; received PFC
configuration takes effect. The admin operational status for a
DCBx exchange of PFC configuration is enabled or disabled.
Operational status (enabled or disabled) of peer device for DCBx
exchange of PFC configuration with a list of the configured PFC
priorities. Willing status of peer device for DCBx exchange
(Willing bit received in PFC TLV): enabled or disabled.
DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities
DCBx operational status (enabled or disabled) with a list of the
configured PFC priorities.
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged
with peer.
• Recommend: Remote PFC configuration parameters were
received from peer.
• Internally propagated: PFC configuration parameters were
received from configuration source.
Operational status for exchange of PFC configuration on local
port: match (up) or mismatch (down).
Type of state machine used for DCBx exchanges of PFC
parameters:
• Feature: for legacy DCBx versions
• Symmetric: for an IEEE version
Status of PFC TLV advertisements: enabled or disabled.
Link delay (in quanta) used to pause specified priority traffic.
Status of FCoE advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Status of ISCSI advertisements in application priority TLVs from
local DCBx port: enabled or disabled.
Priority bitmap used by local DCBx port in FCoE advertisements
in application priority TLVs.
Priority bitmap used by local DCBx port in ISCSI advertisements
in application priority TLVs.
Status of FCoE advertisements in application priority TLVs from
remote peer port: enabled or disabled.
Status of iSCSI advertisements in application priority TLVs from
remote peer port: enabled or disabled.
Number of PFC TLVs received.
Data Center Bridging (DCB)
269