EPSON EPL-5900/EPL-5900L
4.3.15 Power Supply Unit and High Voltage Board Removal
1.
Remove the Right Cover, Left Cover, Top Cover, Rear Cover and Fuser Unit.
(See "4.3.3 Right Cover Removal (p.101)")
(See "4.3.7 Left Cover Removal (p.105)")
(See "4.3.12 Top Cover and Rear Cover Removal (p.107)")
(See "4.3.13 Fuser Unit Removal (p.108)")
2.
Pull the connectors (CN807 and CN813) out of the controller board, and release the
wiring from the cord holder. (See Figure 4-24)
3.
Remove the Power Unit Assy. (Six screws and two connectors)
Disassembly and Assembly
3504
3504
Disassembly and Reassembly of the Printer Body
3704
1305
Figure 4-24. Power Unit Assy Removal
Revision B
1318
1305
113