Machine Speed; Machine Speed & Direction In Which The Machine Pulley Runs; Motor & Belt - KANSAI SPECIAL BX Series Instructions Manual

【3】MACHINE SPEED
3 3 3 3 - - - - 1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs
1 Machine speed & direction in which the machine pulley runs 1 Machine speed & direction in which the machine pulley runs
Refer to the table below for maximum and standard
speeds of the Series. To extend machine life, run
the machine approximately 15~20% below the
maximum speed for the first 200 hours of operation
(approx. 1 month). Then run the machine at the
standard speed.
counterclockwise as seen from the end of the
machine pulley.
3 3 3 3 - - - - 2 Mot 2 Motor & belt or & belt
2 Mot 2 Mot or & belt or & belt
Motor : 3-phase, 2-pole, 400W clutch motor
Belt : M type V belt
Select the proper motor pulley according to the
machine speed (refer to the motor pulley outer
diameter on the table below).
Adjust the position of the motor by pressing the
finger onto the middle of the belt so that 1~2cm
deflection can be achieved (see the illustration on
the right).
< Machine speed >
Model
BX1433
BX1033
PSM
< Motor pulley selection table >
Motor pulley
outer diameter
(mm)
30
40
50
60
70
The machine pulley turns
Maximum speed Standard speed
2500
2500
2000
Machine speed (SPM)
50Hz 60Hz
1250 1450
1650 1950
2050 2450
2500 2950
2900 3450
2000
2000
1500
9