Table of Contents
Advertisement
10. OPERATION MODE
10.1 MASTER CARD REGISTRATION MODE
While the LX006 is operating in the Master Card Registration Mode, the Red and Green LEDs are lit.
10.1.1 MASTER CARD REGISTRATION
The card presented to the LX006 for the first time after initialization becomes the master card.
※ NOTE: Fingerprint verification is not used for the Master Card.
After the Master Card is recognized, the Green LED blinks with 3 beeps.
10.1.2 MASTER CARD CHANGE
You can change the registered Master Card after system initialization.
※ CAUTION : If you initialize the system, all user data will be deleted.
Alternatively, you can change the Master Card using the application software. (Using the application
software keeps the user data unchanged.)
10.1.3 MASTER CARD FUNCTION.
The Master Card is used to toggle the LX006 between the Reader Mode and the Registration Mode.
※ For example,
If you present the master card in the Reader Mode, the LX006 shifts to the Registration Mode.
If you present the master card in the Registration Mode, the LX006 shifts to the Reader Mode.
10.2 REGISTRATION / DELETION MODE
While the LX006 is operating in the Registration/Deletion Mode, the Yellow and Green LED blink.
10.2.1 REGISTRATION MODE FUNCTION
In the Registration Mode, you can register new user cards or delete registered user cards.
- If you present a registered user card, it will be removed from the LX006. (4 beeps)
- If you present an unregistered user card, it will be newly registered to the LX006. (3 beeps)
- If fingerprint registration is failed, only card ID is registered then it works as RF Only mode.
10.2.2 USER CARD REGISTRATION
1. Present the Master Card to the LX006.
26
Advertisement
Table of Contents
