Communication; Rs485 Communication Port Connection; Rs485 Communication Port Connection (Single Connection) - IDTECK LX006 User Manual

Fingerprint identification proximity reader

Hide thumbs Also See for LX006:

Table of Contents

8. COMMUNICATION

An RS-485/RS-232 converter is required to connect serial communication RS485 between the LX006

Main Unit and the Host Computer.

- Connect RS485 - RTX (+) (Yellow) wire of Main Unit to RS485-A of Converter.

- Connect RS485 - RTX (-) (Gray) wire of Main Unit to RS485-B of Converter.

- Plug the RS232 9-pin connector of INC300 converter into COM1 or COM2 Port of Computer.

- Install and run the application software.

* The maximum of cable length can be shortened depending on communication speed, the type of

communication cable and cable installing environment.

(Figure: RS485 Connection between LX006 and Host PC)

Gray Wire

Yellow Wire

Table of Contents