Operation - IDTECK Star RF TINY User Manual

7. Operation

7-1. If it supplies a power, it displays red color that indicates in standby reader.
7-2. Present RF card to the product until you hear beeper sound.
The LED of RF TINY changes color to green simultaneously.
If the product sends RF card data to the controller, LED changes color to red again for next
reading.
7-3. LED Control
To change the LED colors, you may connect LED Control Input (Yellow wire) to GND.
The next LED displays green color that indicates in standby reader.
If you make RF card present, the LED of product changes color to red simultaneously.
And then it turns green again for next reading.
7-4. Buzzer Control
When the product reads RF card, only one beeping sounds in normal operating mode.
Whether the access is granted or denied, the product sounds more beeping to distinguish.
To sound more beeping, you may control the Buzzer Control Input (Blue wire) to GND.
Then you can turn beeper on while you connect Buzzer Control Input to GND.
7