Rbak - Cancel Ringback When Free; Rbseq - Set Ringback Sequence; Recor - Call Record; Relay - Relay Pulse - Avaya IP OFFICE 2420 User Manual

Function Key Programming

RBak - Cancel Ringback When Free

Cancels any set ringback when free function.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
Pressing
using a
by pressing the
[User | Digital Telephony | Advanced | Miscellaneous | Cancel Ringback
When Free]

RBSeq - Set Ringback Sequence

Sets the ringing pattern (sequence) used for voicemail and ringback calls.
This function is currently not supported on the 2420 telephone.

Recor - Call Record

Records the current call at the specified target extension.
This function requires entry of a target extension number when programmed. This
function cannot be programmed through the phone by the user.
When
voicemail mailbox.
Note:
[User | Digital Telephony | Advanced | Call | Call Record]
See also:
•
•

Relay - Relay Pulse

Pulse the specified external output relay (1 or 2) on for 5 seconds.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed. This function cannot be programmed through the phone by the
user.
Pressing
[User | Digital Telephony | Advanced | Relay | Relay Pulse]

Rely+ - Relay On

Switch the specified external output relay (1 or 2) on.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed. This function cannot be programmed through the phone by the
user.
Pressing
[User | Digital Telephony | Advanced | Relay | Relay On]
IP Office 2420 + EU24 User's Guide
40DHB0002UKEG – Issue 4 (9th February 2004)
RBak- switches off any set ring back when free. If the ringback was set
AutCB key, that key will still appear with a symbol that can be cancelled
AutCB key again.
Recor is pressed, the target extensions current call is recorded into their
This function requires Voicemail Pro to be installed. If advice of call recording
is enabled, the call parties will hear a warning before the recording takes
place. In some locations it may be a legal requirement to advise callers that a
call is being recorded.
Listn - Call Listen on page 45.
Steal - Call Steal on page 54.
Relay switches the specified relay on for 5 seconds and then off.
Relay switches the specified relay on.
Function Keys - Page 47
Function Keys - Page 47
Function Key Programming