ITech IT6512C User Manual page 29

Monitor
Ext- Ctrl
Parallel
Loop-Mode
Filter
Info Product information
Model
Ver
SN
Last Cal
Note
[Shift]
Press
operation.Besides, press
Turn off static current function (avoid current
Off
flow-backward)
Turn on static current function (clear voltage
On( Def )
mantissa)
10V(Def) 10V monitoring mode options
5V 5V monitoring mode options
External control mode and related parameter setting
Voltage(Def) Voltage setting mode selection
10V(Def)/5V 10V or 5V setting mode selection. select by
left/right key.
Resistance Resistance setting mode selection.
10k/5k 10K or 5K setting mode selection, select by
left/right key.
Off Disable or enable this function. Select by
up/down key.
On
Parallel mode set up
Single Single mode
Master Act as a master mode
Master Mount: total number of instruments in
parallel.
Slave Act as a slave mode
Control loop setting
CV-Loop CV loop control
High(Def): High speed
Low: Low speed
CC-Loop CC loop control
High(Def): High speed
Low: Low speed
Priority Priority setting
CV(Def): CV priority
CC: CC priority
Set the display filter frequency of the power supply
Low speed frequency
Low
Middle speed frequency
Mid(Def)
High speed frequency
Fast
Model of power supply
Software version
Serial number
calibration information for last time
[P-set]
+ (Menu) to view the menu items, press
[Esc]
button can enable you quit the function operation state.
Copyright© Itech Electronics Co., Ltd.
Function and Features
[Esc]
to quit menu
21