ITech IT6512C User Manual page 28

ReturnMeter
P-Out
CONFIG
Config menu
Load-Status
Load
Static-Curr
Info: The information of LAN.
Config:
IP-Mode: Auto/Manual
Server-Config:
Restore: Restore to factory defaults
Reset: Save all of setting, and the settings take
effect after restart.
Select CAN communication interface
CAN
250K: Baud rate
Addr: address of power supply
Prescaler: Prescaler
BS1 Value: Not settable
BS2 Value: Not settable
Enables automatic delay to switch display from setting to
measured value (meter).
Auto return Meter function disabled.
Off(Def)
Auto return Meter function enabled
On
Power whether power supply was on
After power on, the instrument will be in the off
Off(Def)
state.
If output was on prior to turning the power off,
Last
the ON state will be resumed after power on.
Setting the load status.
Load function is switched off.
Off(Def)
Internal(Def): internal load function
On
External: external load function Ext Load Num:
number of external loads.
Setting the static current when output is Off
Copyright© Itech Electronics Co., Ltd.
LAN Status: Down
IP Mode: Disconnect
IP Addr: 0.0.0.0
SubNet: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP::INSTR:
Socket Port: 30000
MDNS: On/Off
PING: On/Off
telnet-scpi: On/Off
Web: On/Off
VX-11: On/Off
Raw-socket: On/Off
Function and Features
20