The Captive Thumbscrews That Secure The Node - IBM SAN Volume Controller 2145-CG8 Hardware Maintenance Manual

Figure 34. The captive thumbscrews that secure the node and the shipping brackets
4. Pull the SAN Volume Controller 2145-8A4 node completely out of the slides.
Removing the SAN Volume Controller 2145-8G4 from a rack
Use these instructions when you are prompted to remove a SAN Volume Controller 2145-8G4 from a
rack.
If the SAN Volume Controller is not already turned off, see "Turning off the SAN Volume Controller
node" in the IBM System Storage SAN Volume Controller Troubleshooting Guide .
Attention: Do not touch the power control switches on adjacent SAN Volume Controller nodes when
you remove or install SAN Volume Controller nodes in a rack. Touching these switches on adjacent SAN
Volume Controller nodes might cause those devices to turn off and make customer data inaccessible.
| Use the reference numbers in parentheses at the end of each notice, such as (C003) for example, to find
| the matching translated notice in IBM System Storage SAN Volume Controller Safety Notices.
Chapter 2. Removing and replacing parts
51