Download Print this page

IBM TotalStorage IP Storage 200i 110 Installation Manual

Hide thumbs

Advertisement

Quick Links

IBM TotalStorage
IP Storage 200i
Models 110 and 210
Installation Guide
GA27-4301-00

Advertisement

loading

  Related Manuals for IBM TotalStorage IP Storage 200i 110

  Summary of Contents for IBM TotalStorage IP Storage 200i 110

  • Page 1 ™ IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide GA27-4301-00...
  • Page 3 ™ IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide GA27-4301-00...
  • Page 4 Order publications through your IBM representative or the IBM branch office servicing your locality. Publications are not stocked at the address below. IBM welcomes your comments. A form for reader’s comments is provided at the back of this publication. If the form has been removed, you may address your comments to: International Business Machines Corporation Design &...
  • Page 5: Table Of Contents

    Chapter 1. General Information....1 IBM IP Storage 200i ..... . . 1 iSCSI clients .
  • Page 6 Grounding (earthing) requirements....55 IBM Glossary of Storage Networking Terms ... . . 57 Index .
  • Page 7: Tables

    Product information ......5 IBM Web sites for help, services, and information ....37...
  • Page 8 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 9: About This Guide

    This publication contains notices that relate to a specific topic. The Caution and Danger notices also appear in the multilingual safety book that came with your IBM TotalStorage IP Storage 200i. Each notice is numbered for easy reference to the corresponding notices in the safety book.
  • Page 10: Softcopy Publications

    IBM TotalStorage IP Storage 200i Administrator’s Guide, GA27-4274 This publication describes instructions for configuring, maintaining, recovering, and troubleshooting the appliance. v IBM TotalStorage IP Storage 200i Models 100 and 200 Installation Guide, GA27-4273 This publication provides detailed procedures for setting up, cabling components, and configuring IP Storage 200i Models 100 and 200.
  • Page 11: Safety Precautions

    Safety precautions Be sure to read all caution and danger statements in this publication before performing any of the instructions. Leia todas as instruções de cuidado e perigo antes de executar qualquer operação. Prenez connaissance de toutes les consignes de type Attention et Danger avant de procéder aux opérations décrites par les instructions.
  • Page 12 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 13: Chapter 1. General Information

    Models 110 and 210. IBM IP Storage 200i The IBM TotalStorage IP Storage 200i consists of the IBM 4125 IP Storage Models 110 and 210. These models are designed for workgroups, departments, and solution providers that have storage area network requirements across ®...
  • Page 14: Standard Features

    Gigabit Ethernet SX Adapter or Gigabit Ethernet Copper Gigabit Ethernet Copper Adapter Adapter Power supplies Three 250 W (115 - 230 V) Three 250 W (115 - 230 V) IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 15: Optional Features

    Table 2 lists the optional features of the Models 110 and 210. Table 2. Optional Features of Model 110 and Model 210 Feature type Feature Model 110 Model 210 Adapters (one and only one IBM Gigabit Ethernet SX Adapter Option Option is required) IBM Gigabit Ethernet Copper Adapter Option Option...
  • Page 16: Specifications

    Voltage low range 100 - 127 V ac, 50 - 60 Hz Voltage high range 200 - 240 V ac, 50 - 60 Hz Power consumption 0.08 - 0.52 kVA IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 17: Chapter 2. Installation Procedures

    – Publications and Code CD – Safety Information—Read This First – Quick Start Instructions – IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide v Rack-mounting kit (for Model 210), including: – Cable-management assembly – Front and rear rack-mounting templates –...
  • Page 18: A Headless Appliance

    Plan the installation working from the bottom of the rack up. v Take precautions to prevent the rack from overloading the power outlets when you install multiple components in the rack. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 19 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) CAUTION: <2–17> Use safe practices when lifting. CAUTION: <2–18> Do not place any object weighing more than 82 kg (180 lb) on top of rack-mounted devices. CAUTION: <2-20> Do not place your fingers around the rack-support wheels when lowering the engine onto the slide rails.
  • Page 20 6. Use the pins on the slide rail to align the rail with the rack. Use the M6 screws to secure the slide rail to the rack. Repeat this step for the other slide rail. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 21 7. Use the M6 screws to attach the hinge bracket to the rear of the rack. Then, use the hinge pin to attach the cable-management assembly to the slide rail. 8. Fully extend the slide rails out of the rack. 9.
  • Page 22: Installing Optional Features

    Connecting a storage unit to the Model 210 You can attach up to three Model EXP storage units to the Model 210. For detailed installation and cabling instructions for the storage unit, refer to the IBM TotalStorage IP Storage 200i Storage Unit Installation Guide.
  • Page 23: Installing A Hot-Swap Hard Disk Drive

    Installing a hot-swap hard disk drive Attention: v To maintain correct system cooling, do not operate the appliance for more than 2 minutes without either a hard disk drive or a filler panel installed in each drive bay. Therefore, if you are replacing a defective hot-swap drive, either leave the defective drive in place or put in a filler panel until you have a replacement drive.
  • Page 24: Installing Memory Modules

    The cover is in place during normal operations, or is removed for no longer than 30 minutes while the appliance is operating. Note: The front door (Model 110) can be removed permanently without affecting system reliability. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 25: Removing The Cover

    Removing the cover This section describes how to remove the cover from Model 110 and Model 210. Attention: For correct cooling and airflow, replace the cover before switching on the appliance. Operating the appliance for extended periods of time (over 30 minutes) with the cover removed might damage appliance components.
  • Page 26 When you handle electrostatic discharge-sensitive devices (ESDs), take precautions to avoid damage from static electricity. For details on handling these devices, refer to “Handling electrostatic discharge-sensitive devices” on page 54. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 27 DANGER <1–5> Electrical current from power, telephone and communication cables is hazardous. To avoid a shock hazard: v Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. v Connect all power cords to a properly wired and grounded electrical outlet.
  • Page 28 Note: Handle the retaining clips gently to avoid breaking them or damaging the DIMM connectors. DIMM 1 DIMM 2 DIMM 3 DIMM 4 Retaining clip Figure 3. Installing a DIMM IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 29: Replacing The Cover

    7. Turn the DIMM so that the pins align correctly with the connector. Note the notches in the DIMM edge that key the DIMM to the connector. 8. Insert the DIMM into the connector by pressing on one end of the DIMM and then on the other end of the DIMM.
  • Page 30 2. Hold the cover against the engine and slide the cover toward the front of the engine until the cover clicks into place. Flange Top cover Side latches IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 31: Replacing The Gigabit Ethernet Adapter

    Setting memory configuration You are not required to attach a monitor or keyboard to the appliance to set the memory configuration. Replacing the Gigabit Ethernet adapter Your appliance comes with a Gigabit Ethernet adapter in PCI slot 4. The Gigabit Ethernet adapter can be either a Gigabit Ethernet Copper Adapter or a Gigabit Ethernet SX Adapter, depending on your needs.
  • Page 32 Gigabit Ethernet Copper Adapter: Insert the Category 5 twisted-pair RJ-45 network cable into the adapter’s connector. L I N 0 / 0 / 1 0 Figure 6. Attaching a Gigabit Ethernet Copper Adapter IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 33 For 1000BASE-T or 100BASE-TX, your network cable must be Category 5, twisted-pair cabling. If you plan to run the adapter at 1000 Mbps, it must be connected to a compatible 1000-Mbps switch. For 10BASE-T, use Category 3, 4, or 5 twisted-pair cabling. If you want to use this adapter in a residential environment, you must use a Category 5 cable.
  • Page 34: Replacing The Battery

    Replacing the battery IBM has designed this product with your safety in mind. The lithium battery must be handled correctly to avoid possible danger. If you replace the battery, you must adhere to the following safety guidelines. CAUTION: <2–16> When replacing the lithium battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer.
  • Page 35 To replace the battery: 1. Power OFF the appliance and peripheral devices, and disconnect all external cables and power cords. 2. Remove the appliance cover. 3. Remove all of the adapters: Blue adapter-retention bracket Expansion slot cover Adapter Adapter support bracket retaining clip Adapter support bracket Figure 8.
  • Page 36 Use your thumb and index finger to pull the battery from under the battery clip. d. Ensure that the battery clip is touching the base of the battery socket by pressing gently on the clip. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 37 5. Insert the new battery: Note: Ensure that the polarity of the battery is correct. The positive (+) side must face up. a. Tilt the battery so that you can insert it into the socket, under the battery clip. b. As you slide it under the battery clip, press the battery down into the socket. 6.
  • Page 38: Installing The Tower-To-Rack Kit

    3. Route the power and network cables through the cable-restraint bracket on the rear of the engine by opening the bracket and threading the cables through the slots in interior of the bracket, and close the bracket. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 39: Model 210

    Model 210 To attach the cables: 1. Press the safety latches and slide the engine halfway into the rack. 2. For each of the three power cords, connect one end of the power cord to a power supply and the opposite end to a properly wired and grounded electrical outlet.
  • Page 40: Connecting External Options

    Use the information in this section to understand the input/output ports on the appliance. The IP Storage 200i is a headless appliance. Do not attach a keyboard or monitor to the appliance during installation or normal operation. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 41: Input/Output Connector Locations

    Input/output connector locations Figure 11 shows the input/output connectors (ports) and LEDs on the rear of the engine. DC power LED AC power LED Serial port A Mouse port Keyboard port Ethernet port ISM ports USB ports Serial port C Video port Figure 11.
  • Page 42: Powering On And Off The Appliance

    Wait at least 5 minutes before connecting to or configuring the appliance after the initial system start. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 43: Powering Off The Appliance

    Information LED and System Error LED. These LEDs are both off when no problems are detected during startup. If a problem is detected during the diagnostics, refer to the IBM TotalStorage IP Storage 200i Administrator’s Guide. Powering off the appliance CAUTION: <2–19>...
  • Page 44: Performing Initial Configuration

    Swing 2 v Sun Java Plug-in 1.3 or later Note: The Sun Java Plug-in 1.3 is a product of Sun Microsystems, Inc. IBM does not distribute, support or maintain the Sun Java Plug-in 1.3, and your use of this product is subject to license terms and conditions imposed by Sun Microsystems, Inc.
  • Page 45: Accessing The Administrative Console

    Ethernet; however, you can change the default IP address from the serial console by typing enet and pressing Enter at the svc> prompt, and following the instructions on the screen. (See the IBM TotalStorage IP Storage 200i Administrator’s Guide for instructions on setting up the serial console.) To access the Administrative Console through the Service Ethernet 1.
  • Page 46 Note: After you configure the IP address, use port number 1959 to access the Administrative Console. For example: http://128.1.3.1:1959/IBM200i IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 47: Logging In To The Administrative Console

    Then, click Apply. 2. Click Network — Settings. Set the domain name server address, domain, and gateway address. Then, click Apply. See the IBM TotalStorage IP Storage 200i Administrator’s Guide for detailed instructions on configuring the network. Creating a logical drive A logical drive is a unit of storage that is made available to the network.
  • Page 48: Creating And Assigning Vluns

    5. Specify an iSCSI client name and password, and use the default iLUN. Then, click Add. 6. Click Apply. See the IBM TotalStorage IP Storage 200i Administrator’s Guide for detailed instructions on creating and assigning virtual disks. Configuring the system To configure the system settings: 1.
  • Page 49: Appendix A. Getting Help, Service, And Information

    Appendix A. Getting help, service, and information If you need help, service, technical assistance, or just want more information about IBM products, you will find a wide variety of sources available from IBM to assist you. IBM maintains pages on the World Wide Web where you can get information about IBM products and services and find the latest technical information.
  • Page 50: Before You Call For Service

    Installation and maintenance of network operating systems (NOSs) v Installation and maintenance of application programs Refer to your IBM hardware warranty for a full explanation of IBM’s warranty terms. Before you call for service Many computer problems can be solved without outside assistance, by using the...
  • Page 51 In the U.S. and Canada, these services are available 24 hours a day, 7 days a week. In the U.K., these services are available Monday through Friday, from 9:00 a.m. to 6:00 p.m. In all other countries, contact your IBM reseller or IBM marketing representative.
  • Page 52 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 53: Appendix B. Notices

    Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
  • Page 54: Environmental Notices

    Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
  • Page 55: United Kingdom Telecommunications Safety Requirement

    TV communications and to other electrical or electronic equipment. Such cables and connectors are available from IBM authorized dealers. IBM cannot accept responsibility for any interference caused by using other than recommended cables and connectors.
  • Page 56: Trademarks

    Abstand bzw. die Abschirmung zu der industriellen Störquelle zu vergrößern.” Anmerkung: Um die Einhaltung des EMVG sicherzustellen, sind die Geräte, wie in den IBM Handbüchern angegeben, zu installieren und zu betreiben. Taiwan electrical emission statement Japanese Voluntary Control Council for Interference (VCCI)
  • Page 57 Other company, product, and service names may be trademarks or service marks of others. Appendix B. Notices...
  • Page 58 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 59: Appendix C. Safety Notices

    Appendix C. Safety notices The following sections describe the safety and environmental items you must consider for an IBM NAS Appliance. Basic Safety information DANGER Before you begin to install this product, read the safety information in Caution: Safety Information–Read This First, SD21-0030. This booklet describes safe procedures for cabling and plugging in electrical equipment.
  • Page 60 à respecter pour effectuer les opérations de câblage et brancher les équipments électriques en toute sécurité. Vorsicht: Bevor mit der Installation des Produktes begonnen wird, die Sicherheitshinweise in Achtung: Sicherheitsinformationen–Bitte zuerst lesen. IBM IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 61 Form SD21-0030. Diese Veröffentilchung beschreibt die Sicherheitsvorkehrungen für das Verkabien und Anschließen elektrischer Geräte. Vigyázat: Mielôtt megkezdi a berendezés üzembe helyezését, olvassa el a Caution: Safety Information–Read This First, SD21-0030 könyvecskében leírt biztonsági információkat. Ez a könyv leírja, miyen biztonsági intézkedéseket kell megtenni az elektromos berendezés huzalozásakor illetve csatlakoztatásakor.
  • Page 62 Perigo: Antes de iniciar a instalação deste produto, leia as informações de segurança Cuidado: Informações de Segurança–Leia Primeiro, SD21-0030. Este documento descreve como efectuar, de um modo seguro, as ligações eléctricas dos equipamentos. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 63: General Safety

    Peligro: Antes de empezar a instalar este producto, lea la información de seguridad en Atención: Información de Seguridad–Lea Esto Primero, SD21-0030. Este documento describe los procedimientos de seguridad para cablear y enchufar equipos eléctricos. Varning — livsfara: Innan du börjar installera den här produkten bör du läsa säkerhetsinformationen i dokumentet Varning: Säkerhetsforeskrifter –...
  • Page 64: Electrical Safety

    Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 65 v Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly. v Do not work alone under hazardous conditions or near equipment that has hazardous voltages.
  • Page 66: Safety Inspection Guide

    Insulation must not be frayed or worn. 4. Remove the cover. 5. Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
  • Page 67: Grounding (Earthing) Requirements

    2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: v Keep the parts in protective packages until they are inserted into the product. v Avoid contact with other people. v Wear a grounded wrist strap against your skin to eliminate static on your body.
  • Page 68 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 69: Ibm Glossary Of Storage Networking Terms

    An IBM designation for a separately orderable part that (a) has no type number, (b) is for purchase only, and (c) does not receive normal IBM maintenance.
  • Page 70 (AUI). Also known as thick Ethernet, thicknet or 10BASE5. This type of Ethernet connector has a 15-pin D type connector. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 71 BIOS (see Basic Input/Output System). bit-time. (1) The time required to transmit 1 bit on the network. For example, the IBM PC Network bit-time equals 500 nanoseconds (ns). (2) The reciprocal of the line data rate (or network data transfer rate).
  • Page 72 In a LAN, to physically join a cable from a station to an access unit or network connection point. Contrast with attach. connection-oriented. The communication process that proceeds through three well-defined phases: connection establishment, data transfer, and connection release. Examples are: X.25, Internet TCP, and ordinary telephone calls. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 73 (a LUN or set of LUNs); file based (a local or remote file system); or relational (a database). Since IBM TotalStorage NAS family appliances are file based, all of their datastores must be kept in file systems, directories, or files which are kept on LUNs.
  • Page 74 Emulation is usually achieved by means of hardware or firmware (T). (2) The use of programming techniques and special machine features to permit a computing system to execute programs written for another system. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 75 Fast Ethernet. An Ethernet standard that provides a data rate of 100 Mbps. feature code. A code used by IBM to process hardware and software orders. Federal Communications Commission (FCC). A board of commissioners appointed by the President under the Communications Act of 1934, having the power to regulate all interstate and foreign communications by wire and radio originating in the United States.
  • Page 76 Note: In the United States, line frequency is 60 Hz or a change in voltage polarity 120 times per second; in Europe, line frequency is 50 Hz or a change in voltage polarity 100 times per second. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 77 Hypertext Transfer Protocol. In the Internet suite of protocols, the protocol that is used to transfer and display hypertext documents. IBM Disk Operating System (DOS). A disk operating system based on MS-DOS that operates with all IBM-compatible personal computers. IETF (see Internet Engineering Task Force).
  • Page 78 A technology that enables the SCSI transport protocol over an IP network by connecting clients (initiators) and servers to storage. iSCSI client. A device that creates and sends SCSI commands to the target IBM IP Storage appliance. iSCSI client logical-unit number (iLUN). A unique number that is assigned to each VLUN. The iLUN for a single client starts at zero and increments sequentially.
  • Page 79 (MES). Any equipment that is added after the time of the initial order. mode field diameter. A measure of the width of the guided optical power’s intensity distribution in the core and the cladding of a single-mode fiber. IBM Glossary of Storage Networking Terms...
  • Page 80 ODI (see Open Data-Link Interface). Open Data-Link Interface (ODI). A common interface for network drivers developed by Novell. It allows multiple transport protocols to run on one network adapter. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 81 The primary adapter is usually designated as adapter 0 in configuration parameters. Contrast with alternate adapter. promiscuous mode. In a local area network (LAN), a method of processing and monitoring LAN frames that does not discriminate based on address. IBM Glossary of Storage Networking Terms...
  • Page 82 QoS. Quality of service. RAID (see redundant array of independent disks). RAID-5. The RAID method used by the high-performance models of the IBM 9337 Disk Array Subsystem. See redundant array of independent disks and device parity protection. RAM (see random access memory).
  • Page 83 Telnet. In the Internet suite of protocols, a protocol that provides remote terminal connection service. It allows users of one host to log on to a remote host and interact as directly attached terminal users of that host. IBM Glossary of Storage Networking Terms...
  • Page 84 A member of a single storage network of 1 to n fabrics. It can have 1 to n path groups of 1 to n equivalent paths. IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 85 WINS (see Windows Internet Naming Service). Windows networking. Networking file-system protocol for the Windows operating system. Xmodem. A public-domain asynchronous data link control (DLC) protocol that provides packet numbering and checksum error control for the transfer of binary files. IBM Glossary of Storage Networking Terms...
  • Page 86 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 87: Index

    (earthing) requirements 55 time 36 VLUNs 36 connecting a storage unit 10 considerations, system reliability 12 control locks 35 headless, description of 6 cover heat output 4 removing 13 help replacing 17 online 38 © Copyright IBM Corp. 2001...
  • Page 88 3 data 34 order of installation 12 description of 29 preparing to install 12 keyboard 29 standard features 2 locations of 29 supported 12 serial 29 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 89 ports (continued) service 33 taking control of the Administrative Console 35 Service Ethernet 30 temperature video 29 nonoperating environment 4 power requirements 4 operating environment 4 power supply 2 tower-to-rack kit powering off the appliance 31 installing 26 powering on the appliance 30 optional features 3 preinstallation checklist 5 trademarks 44...
  • Page 90 IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide...
  • Page 91 No Thank you for your responses. May we contact you? When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you.
  • Page 92 UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORK POSTAGE WILL BE PAID BY ADDRESSEE IBM Corp. Dept. CFGA PO Box 12195 Research Triangle Park, NC 27709-9990 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...
  • Page 94 Part Number: 38P8618 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. GA27-4301-00...

This manual is also suitable for:

Totalstorage ip storage 200i 210