Polycom Version 1.4.x 17 Administrator's Manual page 113

Administrator Guide - SoundPoint
Attribute
log.render.level
log.render.type
log.render.realtime
log.render.stdout
log.render.file
log.render.file.size
log.render.file.upload.period
log.render.file.upload.append
log.render.file.upload.append.sizeLimit
log.render.file.upload.append.limit-
Mode
4.6.1.16.2 Scheduled Logging Parameters <scheduled/>
The phone can be configured to schedule certain advanced logging tasks on a periodic
basis. These attributes should be set in consultation with Polycom. Each scheduled
® ®
IP / SoundStation IP
Permitted
Values
0-6
0-2
0, 1
0, 1
0, 1
positive
integer
positive
integer
0, 1
positive
integer
delete, stop
Copyright © 2004 Polycom, Inc
Default Interpretation
1 Specifies the lowest class of
event that will be rendered to
the log files. This is the output
filter from the internal mem-
ory-based log system.
2 See above table for timestamp
type.
1 Set to 1. Do not change.
1 Set to 1. Do not change.
1 Set to 1. Do not change.
16 Maximum local application
log file size in Kbytes. When
this size is exceeded, the file is
uploaded to the boot server
and the local copy is erased.
172800 Time in seconds between log
file uploads to the boot server.
Note: The log file will not be
uploaded if no new events
have been logged since the last
upload.
1 If set to 1, use append mode
when uploading log files to
server.
512 Maximum log file size on boot
server in Kbytes.
delete Behavior when server log file
has reached its limit.
delete=delete file and start
over, stop=stop appending to
file.
Optimization
105