Polycom Version 1.4.x 17 Administrator's Manual page 95

Administrator Guide - SoundPoint
4.6.1.7.1.3 Other <Other/>
These default parameter values are used for all packets which are not set explicitly.
Attribute
qos.ethernet.other.user_priority
4.6.1.7.2 IP TOS <IP/>
These settings control the "type of service" field in outgoing packets.
4.6.1.7.2.1 RTP <RTP/>
These parameters apply to RTP packets.
Attribute
qos.ip.rtp.min_delay
qos.ip.rtp.max_throughput
qos.ip.rtp.max_reliability
qos.ip.rtp.min_cost
qos.ip.rtp.precedence
® ®
IP / SoundStation IP
Permitted
Values
0-7
Permitted
Values
0, 1
0, 1
0, 1
0, 1
0-7
Copyright © 2004 Polycom, Inc
Default Interpretation
2 User-priority used for packets that
do not have a per-protocol setting.
Default Interpretation
1 If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don't set it.
1 If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don't set it.
0 If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don't set it.
5 If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don't set them.
Optimization
87