Polycom Version 1.4.x 17 Administrator's Manual page 128

Administrator Guide - SoundPoint IP / SoundStation
4.6.2.1.4.2.1 Server <server/>
Attribute
dialplan.rout-
ing.server.x.address
dialplan.rout-
ing.server.x.port
4.6.2.1.4.2.2 Emergency <emergency/>
In the following attributes, x is the index of the emergency entry description and y is
the index of the server associated with emergency entry x. For each emergency entry
(index x), one or more server entries (indexes (x,y)) can be configured. x and y must
both use sequential numbering starting at 1.
Attribute
dialplan.routing.emer-
gency.x.value
dialplan.routing.emer-
gency.x.server.y
4.6.2.1.5 SIP Logging <logging/> <level/> <change/>
Attribute
log.level.change.sip
120
®
IP
Permitted Values
dotted-decimal IP
address or host name
1 to 65535
Permitted Values
Comma separated list
of entries or single
entry representing a
SIP URL or a combi-
nation of SIP URLs.
positive integer
Permitted
Values Default
0-5 4
Copyright © 2004 Polycom, Inc.
Default Interpretation
Null IP address or host name and
port of a SIP server that will be
used for routing calls. Multi-
5060
ple servers can be listed start-
ing with x=1, 2, ... for fault
tolerance.
Default Interpretation
Null This determines the
URLs that should be
Example:
watched for.
"15,17,18",
"911", "sos". When one of these
defined URLs is detected
as having been dialed by
the user, the call will
automatically be directed
to the defined emergency
server.
Null Index representing the
server defined in
4.6.2.1.4.2.1 Server
<server/> on page 120
that will be used for
emergency routing.
Interpretation
This attribute controls the logging detail level
for the SIP component. These are the input fil-
ters for the internal memory-based log system.
Optimization