Table of Contents
Advertisement
Administrator Guide - SoundPoint
4.6.1.14 Bitmaps <bitmaps/>
Bitmaps used by the phone are defined in this section.
4.6.1.14.1 Platform <IP_300/>, <IP_500/>, <IP_600/> and
<IP_4000/>
In the following table, x=IP_300, IP_500, IP_600, or IP_4000, y is the bitmap number.
Attribute
bitmap.x.y.name
4.6.1.15 Indicators <indicators/>
Indicators (graphic icons, animations, and LED patterns) used by the phone are
defined in this section.
Attribute
ind.idleDisplay.enabled
100
®
®
IP / SoundStation
IP
Permitted Values
The bitmap name
representing a bit-
map to be used.
Permitted
Values
0, 1
Copyright © 2004 Polycom, Inc.
Interpretation
This is a bitmap name to be used for assignment when
doing animation. If the bitmap should be downloaded
from the boot server, the bitmap name must be:
1.
Different from any name already in usage in
ipmid.cfg.
2.
Must match the name of the corresponding <file-
Name>.bmp expected to be retrieved from the
boot server.
Default
Interpretation
0
If set to 1, the idle display may support pre-
sentation of a custom animation if config-
ured properly in the animation section of
ipmid.cfg.
Optimization
Advertisement
Table of Contents
