Polycom Version 1.4.x 17 Administrator's Manual page 127

Administrator Guide - SoundPoint
4.6.2.1.4 Dial Plan <dialplan/>
Attribute
dialplan.impossibleMatch-
Handling
dialplan.removeEndOfDial
4.6.2.1.4.1 Digit Map <digitmap/>
Attribute
dialplan.digitmap
dialplan.digitmap.timeOut
4.6.2.1.4.2 Routing <routing/>
This configuration section allows the user to create a specific routing path for outgoing
SIP calls independent of other 'default' configuration.
® ®
IP / SoundStation IP
Permitted
Values
0, 1 or 2
0, 1
Permitted Values
string compatible with
the digit map feature
of MGCP described in
2.1.5 of RFC 3435.
String is limited to 512
bytes and 20 seg-
ments; a comma is
also allowed; when
reached in the digit
map, a comma will
turn dial tone back on.
positive integer
Copyright © 2004 Polycom, Inc.
Default Interpretation
0 If set to 0, the digits entered up to
and including the point where an
impossible match occurred are sent
to the server immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate
digits and dispatch call manually
with the
Send
1 If set to 1, strip trailing # digit from
digits sent out.
Default
[2-9]11|0T|
011xxx.T|
[0-1][2-
9]xxxxxxxxx|
[2-9]xxxxxxxxx|
[2-9]xxxT
3
Optimization
soft key.
Interpretation
When this attribute is
present, number-only
dialing during the setup
phase of new calls will
be compared against the
patterns therein and if a
match is found, the call
will be initiated automat-
ically eliminating the
need to press Send.
Timeout in seconds for
'T' feature of digitmap.
119