Table of Contents
Advertisement
Administrator Guide - SoundPoint
4.6.1.10 Call Handling Configuration <call/>
Attribute
call.rejectBusyOnDnd
call.enableOnNotRegistered
call.offeringTimeOut
call.ringBackTimeOut
call.lastCallReturnString
call.callWaiting.prompt
call.shared.disableDivert
call.shared.seizeFailReorder
call.shared.one-
TouchResume
a. The call diversion, no answer feature will take precedence over this feature if enabled. For
92
®
IP / SoundStation
more information, see 4.6.3.3.3 No Answer <noanswer/> on page 125.
Copyright © 2004 Polycom, Inc.
®
IP
Permitted
Values
Default
Interpretation
0, 1
1
If set to 1, reject all incoming calls with
the reason "busy" if do-not-disturb is
enabled.
0, 1
1
If set to 1, calls will be allowed when the
phone is not successfully registered, other-
wise, calls will not be permitted without a
valid registration.
positive
60
Time in seconds to allow an incoming call
integer
to ring before dropping the call, 0=infi-
nite
positive
60
Time in seconds to allow an outgoing call
integer
to remain in the ringback state before
dropping the call, 0=infinite.
string of
*69
The string sent to the server when the user
maximum
selects the "last call return" action.
length 32
0, 1
0
If set to 1, an incoming call received when
another call is active will change the User
Interface focus (call appearance and soft
keys).
0, 1
1
If set to 1, disable diversion feature for
shared lines.
0, 1
1
If set to 1, play re-order tone locally on
shared line seize failure.
0, 1
0
If set to 1, when a shared line has a call on
hold the remote user can press that line
and resume the call. If more than one call
is on hold on the line then the first one will
be selected and resumed automatically.
If set to 0, pressing the shared line will
bring up a list of the calls on that line and
the user can select which call the next
action should be applied to.
a
.
Optimization
Advertisement
Table of Contents
