Per-Phone Configuration - Phone1.Cfg; Registration <Reg - Polycom Version 1.4.x 17 Administrator's Manual

Administrator Guide - SoundPoint

4.6.3 Per-phone Configuration - phone1.cfg

This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone config-
uration files. For more information, see 2.2.2.1.3 Deploying a Boot Server for the
Phones on page 13.
4.6.3.1 Registration <reg/>
SoundPoint
600 supports six. Each registration can optionally be associated with a private array of
servers for completely segregated signaling. SoundStation
registration.
In the following table, x is the registration number. IP 300: x=1-2; IP 500: x=1-3; IP
600: x=1-6; IP 4000: x=1
Attribute
reg.x.displayName
reg.x.address
reg.x.label
reg.x.type
® ®
IP / SoundStation
®
IP 300 supports two unique registrations, IP 500 supports three and IP
Permitted
Values
UTF-8 encoded
string
string in the for-
mat userPart or
user-
Part@domain
UTF-8 encoded
string
private OR
shared
Copyright © 2004 Polycom, Inc.
IP
Default
Null
Null
Null
private
Optimization
®
IP 4000 supports a single
Interpretation
Display name used for local user
interface as well as SIP signaling.
The actual address corresponding
to this registration (userPart or
userPart@polycom.com). For user
part only registration
(reg.x.address="1002"), the regis-
tration will be userPart@proxy-
HostNameOrIPAddress where
userPart is reg.x.address and proxy-
HostNameOrIPAddress is either
reg.x.server.1.address if non-Null
or voIpProt.server.1.address speci-
fied in sip.cfg.
Text label to appear on the display
adjacent to the associated line key.
If omitted, the label will be derived
from the user part of reg.x.address.
If set to private, use standard call
signaling.
If set to shared, augment call sig-
naling with call state subscriptions
and notifications and use access
control for outgoing calls.
121