Polycom Version 1.4.x 17 Administrator's Manual page 85

Administrator Guide - SoundPoint
4.6.1.5.1.3 Miscellaneous Patterns
The following table maps miscellaneous patterns to their usage within the phone.
Miscellaneous
pattern number
1
2
3
4
5
6
7
4.6.1.5.2 Ring type <ringType/>
Ring type is used to define a simple class of ring to be applied based on some creden-
tials that are usually carried within the network protocol. The ring class includes
attributes such as call-waiting and ringer index, if appropriate. The ring class can use
one of four types of ring that are defined as follows:
ring
visual
answer
ring-answer
a. Note that auto-answer on incoming call is currently only applied if there is no other
call in progress on the phone at the time.
b. See note a.
In the following table, x is the ring class number. The x index needs to be sequential.
Attribute
se.rt.enabled
® ®
IP / SoundStation IP
Use within phone
new message waiting indication
new instant message
not used
local hold notification
positive confirmation
negative confirmation
welcome (boot up)
Play a specified ring pattern or call waiting indication
Provide only a visual indication (no audio indication) of incoming call (no
ringer needs to be specified).
Provide auto-answer on incoming call
Provide auto answer on incoming call after a ring period
Permitted Values
0,1
Copyright © 2004 Polycom, Inc
a
.
b
.
Interpretation
Set to 1 to enable the ring type feature within
the phone, 0 otherwise.
Optimization
77