Voice Settings <Voice - Polycom Version 1.4.x 17 Administrator's Manual

Administrator Guide - SoundPoint
Attribute
se.rt.modification.enabled
se.rt.x.name
se.rt.x.type
se.rt.x.ringer
se.rt.x.callWait
se.rt.x.timeout
se.rt.x.mod
a. Modification via user interface will be implemented in a future release.
b. Modification via user interface will be implemented in a future release.
4.6.1.6 Voice Settings <voice/>
4.6.1.6.1 Voice Coding Algorithms <codecs/>
The following voice codecs are supported:
Algorithm
G.711µ-law
G.711a-law
G.729AB
78
®
®
IP / SoundStation IP
Permitted Values
0,1
UTF-8 encoded string
ring OR visual OR
answer OR ring-
answer
integer - only relevant
if the type is set to
'ring' or 'ring-answer'
integer - only relevant
if the type is set to
'ring' or 'ring-answer'
positive integer - only
relevant if the type is
set to 'ring-answer'.
Default value is 2000.
0,1
MIME
Type Label Bit Rate
PMCU G711mu 64 Kbps
PCMA G711A 64 Kbps
G729 G729AB 8 Kbps
Copyright © 2004 Polycom, Inc.
Interpretation
Set to 1 to allow user modification via local
user interface of the pre-defined ring type
enabled for modification
Used for identification purposes in the user
b
interface .
As defined in table above.
The ringer index to be used for this class of
ring. The ringer index should match one of
4.6.1.5.1.2 Ringer Patterns on page 76.
The call waiting index to be used for this
class of ring. The call waiting index should
match one defined in 4.6.1.5.1.1 Call
Progress Patterns on page 75.
The duration of the ring in milliseconds
before the call is auto answered. If this field
is omitted or is left blank, a value of 2000 is
used.
Set to 1 if the user interface should allow for
modification by the user of the ringer index
used for this ring class.
Sample
Rate Frame Size
8 Ksps 10ms - 80ms
8 Ksps 10ms - 80ms
8 Ksps 10ms - 80ms
Optimization
a
.
Effective Audio
Bandwidth
3.5KHz
3.5KHz
3.5KHz