Fonts <Font - Polycom Version 1.4.x 17 Administrator's Manual

Administrator Guide - SoundPoint
Attribute
dir.local.volatile.4meg
dir.local.nonVolatile.maxSize.4meg
dir.local.volatile.maxSize
4.6.1.12 Fonts <font/>
This section does not apply to the IP 300.
These settings control the phone's ability to dynamically load an external font file dur-
ing boot up. Loaded fonts can either overwrite pre-existing fonts embedded within the
software (not recommended) or can extend the phone's font support for Unicode
ranges not already embedded. The font file must be a Microsoft .fnt or .fon
mat. The font file name must follow a specific pattern as described:
• Font file name:
• <fontName> is a free string of characters that typically carries the meaning of
• <fontHeightInPixels> describes the font height in number of screen pixels.
• <fontRange> describes the Unicode range covered by this font. Since .fnt or
• <fontExtension> describes the file type. Either .fnt for single 256 characters
9. .fon file format is a collection of .fnt fonts mangled together within a single file.
94
®
IP / SoundStation
<fontName>_<fontHeightInPixels>_<fontRange>.<fontExtension>
the font. Examples are "fontFixedSize" for a fixed-size font, or "fontPropor-
tionalSize" for a proportional size font.
.fon are 256 characters based blocks, the <fontRange> is Uxx00_UxxFF (.fnt
file) or Uxx00_UyyFF (.fon file). For more information, see 3.5.1 Multilingual
User Interface on page 46.
font or .fon for multiple .fnt files.
Copyright © 2004 Polycom, Inc.
®
IP
Permitted
Values Default
0, 1 0
1 to 50 50
1 to 100 100
Optimization
Interpretation
Applies to platforms with 4
Mbytes of flash memory.
If set to 1, use volatile storage
for phone-resident copy of the
directory to allow for larger
size.
Applies to platforms with 4
Mbytes of flash memory.
Maximum size in Kbytes of
non-volatile storage that the
directory will be permitted to
consume.
Maximum size in Kbytes of
volatile storage that the direc-
tory will be permitted to con-
sume.
9
file for-