Table of Contents
Advertisement
Administrator Guide - SoundPoint
log task is controlled by a unique attribute set starting with log.sched.x where x identi-
fies the task.
Attribute
log.sched.x.name
log.sched.x.level
log.sched.x.period
log.sched.x.startMode
log.sched.x.startTime
log.sched.x.startDay
4.6.1.17 Security <security/>
These settings affect security aspects of the phone.
Attribute
sec.tagSerialNo
4.6.1.17.1 Password Lengths <pwd/><length>
Attribute
sec.pwd.length.admin
sec.pwd.length.user
106
®
®
IP / SoundStation
IP
Permitted
Values
Interpretation
alphanu-
Name of an internal system command to be periodically
meric string
executed. To be supplied by Polycom.
0-5
Event class to assign to the log events generated by this
command. This needs to be the same or higher than
log.level.change.slog for these events to appear in the log.
positive
Seconds between each command execution. 0=run once
integer
abs, rel
Start at absolute time or relative to boot.
positive
Seconds since boot when startMode is rel or the start time in
integer OR
24-hour clock format when startMode is abs.
hh:mm
1-7
When startMode is abs, specifies the day of the week to
start command execution. 1=Sun, 2=Mon, ..., 7=Sat
Permitted
Values
Default
0, 1
0
Permitted
Values
Default
0-32
1
0-32
2
Copyright © 2004 Polycom, Inc.
Interpretation
If set to 1, the phone may advertise its serial num-
ber (Ethernet address) via protocol signaling.
Interpretation
Password changes will need to be at least
this long. Use 0 to allow null passwords.
Optimization
Advertisement
Table of Contents
