ABB RET670 Commissioning Manual page 59

1MRK 504 165-UEN A
Transformer protection RET670 2.2 IEC
Commissioning manual
IEC13000060 V1 EN-US
Figure 6: Select the TCP/IPv4 protocol and open Properties
5. Select Use the following IP address and define IP address and Subnet mask if
the front port is used and if the IP address is not set to be obtained
automatically by the IED, see
the IP address chosen for the IED.
IEC13000060-1-en.vsd
Figure 7. The IP address must be different from
Section 4
Starting up
53