Installing The Device In The Rack - Brocade Communications Systems DCX Backbone Hardware Installation Manual

FIGURE 11 Attaching the front tray to the rack rails
1. Tray, front, mid-mount, chassis
5. Screws

Installing the device in the rack

DANGER
Use safe lifting practices when moving the product.
NOTE
A fully populated device requires a hydraulic or assisted lift to install into a rack.
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24
Installing the 14U Chassis Mid-Mount Rack Kit for Two-Post Racks (XBR-DCX-0121)
43