Device Login Issues; Pinpointing Problems With Device Logins - Brocade Communications Systems 1606 Troubleshooting Manual

Device login issues

Pinpointing problems with device logins

1. Log in to the switch as admin.
2. Enter the switchShow command; then, check for state logins.
3. Enter the portCfgShow command to see if the port is configured correctly.
Fabric OS Troubleshoot and Diagnostics Guide
53-1001340-01
A correct login is when the port type matches the device type that is plugged in. In the example
below, it shows that the device connected to Port 1 is a fabric point-to-point device and it is
correctly logged in an F_Port.
switch:admin> switchshow
switchName:brcd5300
switchType:64.3
switchState:Online
switchMode:Native
switchRole:Subordinate
switchDomain:1
switchId:fffc01
switchWwn:10:00:00:05:1e:40:ff:c4
zoning:OFF
switchBeacon:OFF
FC Router:OFF
FC Router BB Fabric ID:1
Area Port Media Speed State
=====================================
0 0 -- N8
1 1 -- N4
2 2 -- N8
3 3 -- N8
(output truncated)
61 61 -- N8
62 62 -- N8
63 63 -- N8
64 64 id N2
(Trunk master)
65 65 -- N8
66 66 -- N8
67 67 id AN
68 68 id N2
69 69 -- N8
70 70 -- N8
71 71 id N2
72 72 -- N8
73 73 -- N8
74 74 -- N8
75 75 -- N8
76 76 id N2
(upstream)(Trunk master)
77 77 id N4
78 78 -- N8
79 79 id N2
(Trunk master)
Proto
No_Module
Online FC F-Port
No_Module
No_Module
No_Module
No_Module
No_Module
Online E-Port
No_Module
No_Module
No_Sync
Online L-Port
No_Module
No_Module
Online L-Port
No_Module
No_Module
No_Module
No_Module
Online E-Port
Online F-Port
No_Module
Online E-Port
Device login issues
10:00:00:05:1e:8f:c1:31
10:00:00:05:1e:34:d0:05 "1_d1"
13 public
13 public
10:00:00:05:1e:34:d0:05 "1_d1"
10:00:00:06:2b:0f:6c:1f
10:00:00:05:1e:34:d0:05 "1_d1"
3
29