Brocade Communications Systems DCX Backbone Hardware Installation Manual page 123

FIGURE 47 3-way ICL cable connections
1. Chassis 1
2. Core switch blades
3. Chassis 2
4. Chassis 3
5. ICL connector (ICL 1)
6. ICL connector (ICL 0)
NOTE
The same general configuration applies regardless of which backbone chassis are used. To keep all three chassis in the
same rack , any combination of DCX and DCX-4S backbones can be used except three DCX chassis.
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24
Removal and replacement of the inter-chassis link (ICL) cables
123