Installing the 14U Rack Mount Kit for Four-Post Racks (XBR-DCX-0120 and XBR-DCX-0152)
FIGURE 4 NEBS kit parts list
1.
Left cable comb assembly (1)
2.
Right cable comb assembly (1)
3.
Air filter (1)
4.
Chassis door (1)
Assembling the rack hardware
Attach the left and right rack mount shelf brackets to the rack rails.
NOTE
If cables are to be routed down through the cable management comb, allow space below the brackets for cable management
1.
Locate the shelf brackets in the device.
34
5.
Velcro strap (8)
6.
Screw, 10-32 x .63-in., square cone washer (10)
7.
Screw, 8-32 x .312 in., flathead (20)
8.
Nut retainer (6)
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24