Table of Contents
Advertisement
Removal and replacement of the blower assembly
3.
Grasp the handle and pull, sliding the blower assembly from the chassis and supporting the blower assembly from beneath as
you remove it.
FIGURE 36 Removal and replacement of the blower assembly
Replacing a blower assembly
1.
Orient the blower assembly and slide it into the chassis, pushing firmly to ensure that it is seated.
2.
Verify that the power LED displays a green light.
3.
Use the screwdriver or your fingers to tighten the captive screws.
104
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24
Advertisement
Table of Contents
Troubleshooting
