Brocade Communications Systems DCX Backbone Hardware Installation Manual page 45

6. Use four screws (Item 5) to attach each side of the front tray to the device
7. Use six screws (Item 5) to attach the lip on each side of the front tray to the lip on the front of the device.
NOTE
Do not use the top or bottom holes of the Brocade mounting bracket because the door will interfere with the screw
heads.
FIGURE 13 Attaching trays to the device
8. Reinstall the device door. For instructions, refer to the door removal and installation instructions in your device installation guide.
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24
Installing the 14U Chassis Mid-Mount Rack Kit for Two-Post Racks (XBR-DCX-0121)
45