Replacing An Icl Cable - Brocade Communications Systems DCX Backbone Hardware Installation Manual

2. Repeat for each cable that requires replacement.
FIGURE 41 ICL cable

Replacing an ICL cable

1. Align the color-coded and labeled (ICL 1 and ICL 0) plugs on either end of the ICL cable with their respective connectors on the
core switch blades (CR-8).
2. Push each plug in until the latch mechanism clicks into place.
3. Repeat steps 1 and 2 for each cable that requires replacement.
If you are installing ICL cables for the first time, pay particular attention to the configuration in which the cables must be
installed.
Brocade DCX Backbone Hardware Installation Guide
53-1000685-24
Removal and replacement of the inter-chassis link (ICL) cables
117