Lower Leg Removal And Service; 50/200 Hour Service; Lower Leg Removal - SRAM ROCKSHOX RUDY XPLR Service Manual

L o w e r L e g R e m o v a l a n d S e r v i c e
5 0 / 2 0 0 H o u r S e r v i c e
1 Ultimate: Make sure the compression is unlocked. Ultimate: Make sure the compression is unlocked.
2 Remove the air valve cap. Remove the air valve cap.
3 Depress the Schrader valve and release all air pressure. Depress the Schrader valve and release all air pressure.
⚠ CAUTI ON - EYE HAZARD
Verify all pressure is removed from the fork before proceeding.
Failure to do so can result in injury and/or damage to the fork. Wear
safety glasses.
The Maxle inserts are reverse threaded. To avoid damaging the fork when removing or installing Maxle inserts, carefully read the instructions and
follow directional arrows.
4
Use an 8 mm hex wrench to remove the Maxle insert from the spring Use an 8 mm hex wrench to remove the Maxle insert from the spring
side of the lower leg by rotating the insert clockwise side of the lower leg by rotating the insert
L o w e r L e g R e m o v a l
N OT ICE
clockwise. .
Ultimate
Small Hex
8 mm

Lower Leg Removal and Service

8 mm
10