Table of Contents
Advertisement
2 0 0 / 6 0 0 H o u r S e r v i c e
Side-to-side movement between the inner and outer posts is an indication
that the brass keys are worn and need to be replaced. Vertical lines on the
key are an indication that the key is worn.
New brass keys must be of the same size and have the same number of
etched lines as the original brass keys for proper function.
Refer to the RockShox Spare Parts Catalog at
list of brass key kits available.
1
Apply a liberal amount of grease onto each key slot and onto the upper
Apply a liberal amount of grease onto each key slot and onto the upper
post.
post.
Install the three brass keys into the key slots. The orientation of the
Install the three brass keys into the key slots. The orientation of the
brass keys is not critical.
brass keys is not critical.
2
Apply a liberal amount of grease onto the brass keys, bushings, and
Apply a liberal amount of grease onto the brass keys, bushings, and
the upper post.
the upper post.
B r a s s K e y s I n s t a l l a t i o n
NOTI CE
www.sram.com/service
for a
Worn brass key
SRAM Butter Grease
SRAM Butter Grease
SRAM Butter Grease
New brass key
SRAM Butter Grease
34
Brass Keys Installation
Advertisement
Table of Contents
