Table of Contents
Advertisement
SRAM Battery Charging
1
Remove the battery cover from each SRAM battery and charge both
batteries.
Consult the SRAM Battery and Charger User Manual at
www.sram.com/service
for charging instructions, battery
maintenance, and travel guidelines.
Suspension Module Battery Installation
A
B
Open the battery latch and remove the battery block.
Remove/Loosen
2
1
2
Install
3
N OTI CE
Do not discard the battery cover. To protect the battery terminals,
install the battery cover on the battery when it is not on the
charger or component.
N OTICE
Do not discard the battery covers (A) and component battery
blocks (B).
To prevent battery depletion during transportation, remove the
SRAM batteries and install the battery blocks into each battery
slot. Install each battery cover onto each battery.
Failure to cover the batteries and component battery terminals
could result in damage to the terminals.
N OTI CE
The battery block is installed to protect the electronic terminals.
Adjust
4
2
1
12
Advertisement
Table of Contents
