Sram Etap Axs Hrd Hose Replacement; Parts, Tools And Supplies; Hose Removal - SRAM eTap AXS Service Manual

S R A M e T a p A X S H R D H o s e R e p l a c e m e n t
Perform the hose replacement service if the hose needs to be replaced. For hose shortening instructions, consult the eTap AXS HRD Hose Shortening
and Bleed Manual at www.sram.com/service.
P a r t s , T o o l s a n d S u p p l i e s
Parts
• Disc Brake Hose Hood Assembly - SRAM RED eTap
Safety and Protection Supplies
• Apron
• Clean, lint-free shop towels
• Nitrile gloves
• Oil pan
• Safety glasses
Lubricants and Fluids
• Isopropyl alcohol
• SRAM DOT assembly grease
SRAM Tools
• SRAM hydraulic hose cutter tool
• Monoblock bleed block
H o s e R e m o v a l
Remove the wheel from the bicycle according to the manufacturer's
1
instructions.
Remove the E-clip from the pad retention bolt, then remove the pad
2
retention bolt from the caliper.
Common Tools
• Needle nose pliers
• 2.5 mm hex wrench
• 2.5 mm hex bit socket
• T8 and T25 TORX wrenches
• T25 TORX bit socket
• 8 mm flare nut wrench
• 8 mm crowfoot wrench
• 10 mm open end wrench
• Torque wrench
• Marker
Needle nose pliers

SRAM eTap AXS HRD Hose Replacement

2.5 mm
20 mm or 15 mm Thru Axle
17