D-Link DES-3250TG User Manual page 91

Figure 6- 12. Port Configuration window
The From and To drop-down dialog boxes allow different ports
to be selected for configuration.
Use the State pull-down menu to either enable or disable the
selected port.
Use the Speed/Duplex pull-down menu to select the speed
and duplex/half-duplex state of the port. The Auto setting
allows the port to automatically determine the fastest settings
the port on the device connected to the DES-3250TG can
handle, and then use those settings. The other options for
ports 1-48 are 100M/Full,
10M/Half. For Combo ports 49 and 50, if the optional Mini-
GBIC plug-in module is used, the options are Auto and
1000/Full. Otherwise, the two 1000BASE-T Copper ports offer
the same five choices for ports 1-48, plus a 1000/Full option.
Please note that although the two front panel modules can be
used simultaneously, the ports must be different. For example,
if port 50x is used on the Mini GBIC module, port 50x is not
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
100M/Half,
83
10M/Full, and