Using Web-Based Management - D-Link DES-3250TG User Manual

Using Web-Based Management

Setting up Web Management
Before running Web-based
configuration of the switch may need to be performed. The
following at a minimum must be configured or known for the
switch to be managed:
•
IP Address
•
Subnet Mask
•
Administrator password
In addition, several other parameters may need to be
configured or known to properly communicate with the switch
or allow full management capability. These include:
•
Default Gateway
•
Trap Destination and Community Name
Configuration of these items may be made from the User
Interface, which is accessible via either the serial console or
Telnet. Refer to the User's Guide that came with your system
for more information about the subsection describing the
required configuration.
Setting an IP Address
The IP address for the switch must be set before it can be
managed with the Web-based manager. The switch IP address
may be automatically set using BOOTP or DHCP protocols, in
which case the actual address assigned to the switch must be
known.
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
management,
69
some basic