Power Failure - D-Link DES-3250TG User Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
• All LED indicators will momentarily blink. This
blinking of the LED indicators represents a reset of
the system
• The power LED indicator is always on after the power
is turned ON
• The console LED indicator will blink while the Switch
loads onboard software and performs a self-test. It
will remain ON if there is a connection at the RS-232
port, otherwise this LED indicator is OFF

Power Failure

As a precaution in the event of a power failure, unplug the
switch. When the power supply is restored, plug the switch
back in.
10