D-Link DES-3250TG User Manual page 139

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
can be specified on a basis of VLAN, MAC address, or IP
address.
Creating an access profile is divided into two basic parts. The
first is to specify which part or parts of a frame the switch will
examine, such as the MAC source address or the IP destination
address. The second part is entering the criteria the switch will
use to determine what to do with the frame. The entire process
is described below in two parts.
Click Access Profile Table on the Configuration menu to
open the Access Profile Table window:
Figure 6- 38. Access Profile Table window
To create an Access Profile Mask:
Click the Add button in the window above. A new window is
displayed. Use this to create an access profile and specify what
criteria are used to examine frames. Once the profile has been
created you can set up the rule applied to the profile as
described later in this section.
131