Vlans - D-Link DES-3250TG User Manual

The following fields can be set:
Parameter
VID
Multicast MAC
Address
Port
None
Egress

VLANs

To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions and
to configure the port settings for IEEE 802.1Q VLAN support.
Go to the Configuration menu, select the VLANs folder, and
click Static VLAN Entry to open the following window:
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Description
Allows the entry of the VLAN ID of
the VLAN the MAC address below is
a member of.
Allows the entry of the multicast
MAC address of an end station that
will be entered into the switch's
static forwarding table.
Select the port number on which the
MAC address entered above resides.
Specifies the port as being none.
Specifies the port as being a source
of multicast packets originating from
the MAC address specified above.
105