D-Link DES-3250TG User Manual page 100

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Querier State
State
Static Router Port Settings
A static router port is a port that has a multicast router
attached to it. Generally, this router would have a connection
to a WAN or to the Internet. Establishing a router port will
allow multicast packets coming from the router to be
propagated through the network, as well as allowing multicast
messages (IGMP) coming from the network to be propagated to
the router.
A router port has the following behavior:
•
All IGMP Report packets will be forwarded to the router
port.
leave group message from a host,
and the switch issuing a group
membership query. If the switch
does not receive a response from the
group membership query before the
Leave Timer expires, the forwarding
table entry for the multicast address
is deleted from
forwarding table. The default is 2
seconds.
This field can be switched using the
pull-down menu between Disabled
and Enabled.
This field can be switched using the
pull-down menu between Disabled
and Enabled. This is used to enable
or disable IGMP Snooping for the
specified VLAN.
92
the switch's