D-Link DES-3250TG User Manual page 168

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
To delete an existing entry, click the selection button in the
Delete column on the far right that corresponds to the port you
want to configure. To create a new entry, configure the
parameters as desired in the top part of the window above and
click the Apply button. This will add the new string to the
SNMP Community Table.
Configure the following for the new SNMP Community entry:
Parameter
Community Name
View Name
Access Right
Description
Type an alphanumeric string of up to
32 characters that is used to identify
members of an SNMP community.
This string is used like a password to
give remote SNMP managers access
to MIB objects in the switch's SNMP
agent.
Type an alphanumeric string of up to
32 characters that is used to identify
the group of MIB objects that a
remote SNMP manager is allowed to
access on the switch. The view name
must exist in the SNMP View Table.
Use the pull-down menu to select the
access right:
Read_Only − Specifies that SNMP
community members using the
community string created with this
command can only read the contents
of the MIBs on the switch.
Read_Write − Specifies that SNMP
community members
160
using the