D-Link DES-3250TG User Manual page 85

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Subnet Mask
Default Gateway
VLAN Name
xxx is a number
decimal form) between 0 and 255. This
address should be a unique address
on the network assigned for use by the
network administrator.
which require entries under this option
are as follows:
A Bitmask that determines the extent
of the subnet that the Switch is on.
Should be of the form xxx.xxx.xxx.xxx,
where each xxx
(represented in decimal) between 0 and
255. The value should be 255.0.0.0 for
a Class A network, 255.255.0.0 for a
Class B network, and 255.255.255.0
for a Class C network, but custom
subnet masks are allowed.
IP address that determines where
packets with a destination address
outside the current subnet should be
sent. This is usually the address of a
router or a host acting as an IP
gateway. If your network is not part of
an intranet, or you do not want the
Switch to be accessible outside your
local network, you can leave this field
unchanged.
This allows the entry of a VLAN name
from which a management station (a
computer) will be allowed to manage
the switch using TCP/IP (in-band, or
over the network).
stations that are on VLANs other than
the one entered in the VLAN Name
field will not be able to manage the
77
(represented in
The fields
is a number
Management