Switch To Hub Or Switch - D-Link DES-3250TG User Manual

Figure 4-1. Switch connected to an End Node
•
The Link/Act LEDs in the top row for each UTP port
light green when the link is valid. A blinking LED in
the top row indicates packet activity on that port.

Switch to Hub or Switch

These connections can be accomplished in a number of ways
using a normal cable.
● A 10BASE-T hub or switch can be connected to the
Switch via a two-pair Category 3, 4 or 5 UTP/STP
cable.
● A 100BASE-TX hub or switch can be connected to the
Switch via a two-pair Category 5 UTP/STP cable.
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
17