D-Link DES-3250TG User Manual page 144

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Mode
Select permit to specify that the packets
that
forwarded by the switch according to any
additional rule added (see below).
Select deny to specify that packets that
do not match the access profile are not
forwarded by the switch and will be
filtered.
To establish the rule for a previously created Access
Profile:
Select the Access Profile entry from the Access Profile Table
window and then click the Modify button for that individual
entry.
Figure 6- 41. Access Rule Table window
To create a new rule set for the access profile click the Add
button. A new window is displayed. To remove a previously
created rule, select it and click the Delete button.
mask for the destination port in hex
form (hex 0x0-0xffff).
match the access
136
profile are