D-Link DES-3250TG User Manual page 83

Figure 6- 9. IP Address Settings window
Note: The switch's factory default IP address is 10.90.90.90
with a subnet mask of 255.0.0.0 and a default gateway
of 0.0.0.0.
To manually assign the switch's IP address, subnet mask,
and default gateway address:
Select Manual from the Get IP From drop-down menu.
Enter the appropriate IP address and subnet mask.
If you want to access the switch from a different subnet from
the one it is installed on, enter the IP address of the gateway. If
you will manage the switch from the subnet on which it is
installed, you can leave the default address in this field.
If no VLANs have been previously configured on the switch, you
can use the default VLAN − named "default." The default VLAN
contains all of the switch ports as members. If VLANs have
been previously configured on the switch, you will need to enter
the VLAN name of the VLAN that contains the port that the
management station will access the switch on.
DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
75