D-Link DES-3250TG User Manual page 202

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The TFTP server must be on the same IP subnet as the switch.
Enter the path and the filename to the firmware file on the
TFTP server.
The TFTP server must be running TFTP server software to
perform the file transfer. TFTP server software is a part of many
network management software packages – such as NetSight, or
can be obtained as a separate program.
Use the Save Changes from the Maintenance menu to enter
the address into NV-RAM.
Click Start to initiate the file transfer.
Download Settings from TFTP Server
To download a configuration file for the switch's, click on
the Maintenance folder and then the TFTP Services folder
and finally click on the Download Settings from TFTP
Server link:
Figure 6- 84. Download Settings from TFTP Server window
Enter the IP address of the TFTP server and specify the location
of the switch configuration file on the TFTP server and click
Start to initiate the file transfer.
194