Verifying The Configuration - HP 10500 Series Configuration Manual

# Execute the ping ipv6 command on Switch A to verify the connectivity between Switch A and
Switch B.
[SwitchA] ping ipv6 3001::1
PING 3001::1 : 56
Reply from 3001::1
bytes=56 Sequence=0 hop limit=64
Reply from 3001::1
bytes=56 Sequence=1 hop limit=64
Reply from 3001::1
bytes=56 Sequence=2 hop limit=64
Reply from 3001::1
bytes=56 Sequence=3 hop limit=64
Reply from 3001::1
bytes=56 Sequence=4 hop limit=64
--- 3001::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/3/9 ms
# Display the neighbor information of GigabitEthernet 1/0/2 on Switch A.
[SwitchA] display ipv6 neighbors interface GigabitEthernet 1/0/2
IPv6 Address
FE80::215:E9FF:FEA6:7D14
2001::15B:E0EA:3524:E791
The output shows that the IPv6 global unicast address that Host obtained is
2001::15B:E0EA:3524:E791.

Verifying the configuration

# Display the IPv6 interface settings on Switch A. All the IPv6 global unicast addresses configured on the
interface are displayed.
[SwitchA] display ipv6 interface vlan-interface 2
Vlan-interface2 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:2
Global unicast address(es):
3001::1, subnet is 3001::/64
Joined group address(es):
FF02::1:FF00:0
FF02::1:FF00:1
FF02::1:FF00:2
FF02::2
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
data bytes, press CTRL_C to break
Type: S-Static D-Dynamic
Link-layer
0015-e9a6-7d14
0015-e9a6-7d14
129
time = 3 ms
time = 2 ms
time = 2 ms
time = 3 ms
time = 9 ms
VID Interface
1 GE1/0/2
1 GE1/0/2
State T Age
STALE D 1238
STALE D 1248